I-wafer ye-Silicon yohlobo lwe-N oluyi-6 intshi okanye uhlobo lwe-P oluyi-wafer ye-CZ Si

I-wafer ye-silicon eyi-6 intshi N okanye uhlobo lwe-P ye-wafer ye-CZ Si Umfanekiso obonisiweyo

Inkcazo emfutshane:

Ii-wafer ze-silicon ezi-intshi ezi-6 zizinto eziqhelekileyo ze-silicon substrate ezisetyenziswa kakhulu ekwenzeni ii-circuits ezidibeneyo. Ezi wafers ziyacutshungulwa kwaye zicocwe ukuze kwenziwe iintlobo ezahlukeneyo zee-circuits ezidibeneyo, kubandakanya ii-microprocessors, ii-memory chips, ii-sensors, kunye nezinye izixhobo ze-elektroniki. Iingenelo zee-wafer ze-silicon ezi-intshi ezi-6 ziquka indawo yazo enkulu, ukuqhuba kakuhle kobushushu, kunye nexabiso eliphantsi. Ezi mpawu zenza ii-wafer ze-silicon ezi-intshi ezi-6 zibe zezinye zezona zikhetho zifanelekileyo zokwenziwa kwee-circuits ezidibeneyo.

Thumela i-imeyile kuthi

Iimbonakalo

Yazisa ngebhokisi ye-wafer

Iinkcukacha zeSilicon wafer:

I-wafer ye-silicon eyi-intshi ezi-6 Ukukhula: CZ, MCZ, FZ。

I-silicon wafer eyi-6 Ibanga: I-Prime, Uvavanyo, i-Dummy, njl.

I-wafer yeSilicon eyi-intshi ezi-6 Ububanzi: intshi ezi-6/150mm.

I-silicon wafer eyi-6 intshi Ubukhulu: 200 ~ 3000um.

I-wafer ye-silicon eyi-intshi ezi-6 Isiphelo: Njengoko isikiwe, sidibene, sikroliwe, si-SSP, si-DSP, njl.

I-wafer yeSilicon eyi-intshi ezi-6 Ulwalathiso: (100) (111) (110) (531)(553) njl.

I-wafer ye-silicon eyi-intshi ezi-6. Ayinqunyulwanga: ukuya kuthi ga kwi-4deg.

I-silicon wafer eyi-6 intshi Uhlobo/Isiphumo: P/B, N/Phos, N/As, N/Sb, Intrinsic。

I-wafer ye-Silicon eyi-intshi ezi-6 Ukumelana: CZ/MCZ: Ukusuka kwi-0.001 ukuya kwi-1000 ohm-cm. FZ: ukuya kuthi ga kwi-20k ohm-cm.

I-silicon wafer eyi-6 intshi Iifilimu ezincinci: (a)PVD: Al, Cu, Au, Cr, Si, Ni;, Fe, Mo. njl., Ubukhulu bokugquma ukuya kuthi ga kwi-20.000A/5%.

(b) I-LPCVD/PECVD: I-Oxide, i-Nitride, i-siC, njl.njl. Ubukhulu bokugquma ukuya kuthi ga kwi-200.000A/3%.

Iinkqubo ze-silicon wafer eziyi-6 intshi: a.DSP, incinci kakhulu, ithambile kakhulu, njl.

b. Ukunciphisa ubungakanani, ukugaya umqolo, ukunqumla, njl.njl. c. I-MEMS.

Ukususela ngo-2010, iShanghai XKH Material Tech. Co.,Ltd izibophelele ekuboneleleni abathengi ngezisombululo zeSilicon Wafer ezipheleleyo ze-4-intshi, ukusuka kwi-debugging level wafers Dummy Wafer, i-test level wafers Test Wafer, ukuya kwi-product level wafers Prime Wafer, kunye ne-special wafers, i-Oxide wafers Oxide, i-Nitride wafers Si3N4, i-aluminium plated wafers, i-Copper plated silicon wafers, i-SOI Wafer, i-MEMS Glass, i-customized ultra-thick and ultra-flat wafers, njl.njl., ezinobukhulu obuqala kwi-50mm-300mm, kwaye singabonelela nge-semiconductor wafers nge-single-side/double-side polishing, thinning, dicing, MEMS kunye nezinye iinkonzo zokucubungula kunye nokwenza ngokwezifiso.